Tag Archives: shaft trailer

China wholesaler 1 Available CZPT in Bulk Track 1850mm or Optional Part Trailer Axle axle shaft

Product Description

trailer part 16ton trailer axle rear axle

Company introduction:

ZheJiang CZPT Co.,Ltd is 1 of the major manufacturers specializing in the production of trailer axles.

Our company has high technological background, sophisticated manufacturing technology, advances detection means, perfect quality assurance system. It is a specialized manufacturer integrating scientific research, design, production and sales.

The production of “FUSAI” trailer axles passed the national authoritative department detection. The fatigue life is up to 1,500,000 times without damage-more than 3 times above the national standard, which is in the leading domestic level, and reach or exceed the international standards. Our products are popular not only in domestic markets, but all over the world. Since the products are designed and optimized by computer, they have reasonable structure, good braking performance, high strength and rigidity, strong bearing capacity, long service life, good service, trusted by the users.   

“FUSAI” brand German style trailer axle
1.German spindle design which is the widely used in the industry with proven performance
2.Low-alloy machined spindles, friction welded seamlessly, and overall heat treating process
3.Axle stubs and brake hubs are all CZPT forging, ensure they are more powerful and better steady
4.Special clone-shape design on the axle-shoulders, lessening stress concentration and enhancing anti-fatigue performance
5.Unique design on axle stubs (with a precise declination angel at both ends) to minimize tire wear
6.National and industry standard compliant set components
7.National Automobile Monitor and Inspection Center certified axle shaft that undergoes over 1.2 million times of Fatigue testing and built to meet or exceed national industry standards.

German style axle specifications:

Axle

Type

Max.

Capacity

(T)

Track

(mm)

Brake

(mm)

Center

Distance

Of

Spring

Seat

(mm)

Axle

Beam

(mm)

Center

Distance

Of

Brake

Chamber

(mm)

Stud

 

P.C.D

(mm)

Hole

Diameter

(mm)

Total

Length

(mm)

Recommended

Wheel

 

Axle

Weight

(kg)

FS-

12

12

1840

420*

200

≥980

150*

150

420

10*

M22*

1.5

335

281

2158

7.5V-20

390

FS-

14

14

1840

420*

200

≥900

150*

150

430

10*

M22*

1.5

335

281

2172

8.0V-20

417

FS-

16

16

1850

420*

200

≥900

150*

150

280

10*

M22*

1.5

335

281

2245

8.5V-20

548

Attention:

1. Optional track length available.

2. Optional ABS and automatic slack adjuster available.

3. All the components are in common use of BPW.

4. Rights of changing product’s design and specification are reserved.

More products and information, please refer to our website: sdfhcq

ZheJiang CZPT Co.,Ltd
Sales manager: Norton Hu

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Available
Warranty: 1 Year
Type: Axle
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

axle

What are the safety considerations when working with axles, especially during repairs?

Working with axles, especially during repairs, requires careful attention to safety to prevent accidents and injuries. Here are some important safety considerations to keep in mind when working with axles:

1. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed boots. PPE helps protect against potential hazards such as flying debris, sharp edges, and accidental contact with heavy components.

2. Vehicle Stability:

Ensure that the vehicle is on a stable and level surface before working on the axles. Engage the parking brake and use wheel chocks to prevent unintended vehicle movement. The stability of the vehicle is crucial to maintain a safe working environment.

3. Lifting and Support:

Use proper lifting equipment, such as hydraulic jacks or vehicle lifts, to raise the vehicle safely. Follow the manufacturer’s guidelines for lifting points and weight capacities. Once the vehicle is lifted, support it securely with jack stands or other appropriate supports to prevent it from falling or shifting during repairs.

4. Lockout/Tagout:

If the repair work involves disconnecting or removing any electrical or mechanical components that could cause the axle or wheels to move, follow lockout/tagout procedures. This involves locking and tagging out the power source, so it cannot be accidentally energized while work is being performed.

5. Proper Tools and Equipment:

Use the correct tools and equipment for the job. Using improper tools or makeshift methods can lead to accidents and damage to the axle or surrounding components. Follow the manufacturer’s instructions and recommended procedures for disassembling, repairing, and reassembling the axle.

6. Proper Torque and Tightening:

When reassembling the axle components, use a torque wrench to ensure that fasteners are tightened to the manufacturer’s specifications. Over-tightening or under-tightening can lead to component failure or damage. Follow the recommended torque values provided by the vehicle manufacturer.

7. Safe Handling of Heavy Components:

Axle components can be heavy and cumbersome. Use appropriate lifting techniques and equipment, such as hoists or lifting straps, to safely handle heavy axle parts. Avoid lifting heavy components alone whenever possible and ask for assistance when needed.

8. Proper Disposal of Fluids and Waste:

If the repair involves draining fluids from the axle, such as differential oil, ensure proper disposal according to local regulations. Use appropriate containers to collect and store fluids and dispose of them at authorized collection points.

9. Training and Experience:

Working with axles requires knowledge and experience. If you are unfamiliar with axle repairs, consider seeking assistance from a qualified mechanic or technician who has the necessary training and expertise. If you decide to perform the repairs yourself, ensure that you have the appropriate knowledge and skills to carry out the task safely.

By following these safety considerations, you can help minimize the risk of accidents, injuries, and damage when working with axles, ensuring a safe working environment for yourself and others involved in the repair process.

axle

What are the symptoms of a failing CV joint, and how does it relate to the axle?

A CV (constant velocity) joint is an essential component of the axle assembly in many vehicles. When a CV joint starts to fail, it can exhibit several symptoms that indicate potential problems. Here’s a detailed explanation of the symptoms of a failing CV joint and its relationship to the axle:

Symptoms of a Failing CV Joint:

1. Clicking or popping sounds: One of the most common signs of a failing CV joint is a clicking or popping sound when making turns. This noise usually occurs during tight turns and may indicate worn-out or damaged CV joint bearings.

2. Grease leakage: A failing CV joint may leak grease, which can be seen as dark-colored grease splattered around the CV joint or on the inside of the wheel. Grease leakage is typically caused by a cracked or damaged CV joint boot, which allows the lubricating grease to escape and contaminants to enter.

3. Excessive vibration: A worn-out CV joint can cause vibrations, especially during acceleration. The vibrations may be felt in the steering wheel, floorboards, or even the entire vehicle. These vibrations can become more noticeable as the CV joint deteriorates further.

4. Difficulty in turning: As the CV joint wears out, it may become difficult to turn the vehicle, especially at low speeds or when making sharp turns. This symptom is often accompanied by a clicking or popping sound.

5. Uneven tire wear: A failing CV joint can lead to uneven tire wear. If the CV joint is damaged or worn, it can cause the axle to wobble or vibrate, resulting in uneven tire tread wear. This can be observed by visually inspecting the tires and noticing uneven patterns of wear.

Relationship to the Axle:

The CV joint is an integral part of the axle assembly. It connects the transmission to the wheels and allows smooth power delivery to the wheels while accommodating the up-and-down motion of the suspension. The axle shaft is responsible for transmitting torque from the transmission to the CV joints and ultimately to the wheels.

Axles contain one or more CV joints, depending on the vehicle’s drivetrain configuration. In front-wheel drive vehicles, each front axle typically has two CV joints, one inner and one outer. Rear-wheel drive and all-wheel drive vehicles may have CV joints on both the front and rear axles.

The CV joint consists of a joint housing, bearings, and internal ball bearings or rollers. It is protected by a rubber or thermoplastic CV joint boot, which seals in the grease and protects the joint from contaminants. When the CV joint fails, it can affect the axle’s ability to transmit power smoothly and result in the symptoms mentioned above.

Regular inspection and maintenance of the CV joint and axle assembly are crucial to identify and address any issues promptly. If any of the symptoms mentioned earlier are observed, it is recommended to have the vehicle inspected by a qualified mechanic to determine the exact cause and perform necessary repairs or replacements.

axle

What are the factors to consider when choosing an axle for a custom-built vehicle?

Choosing the right axle for a custom-built vehicle is crucial for ensuring optimal performance, durability, and safety. Here are several key factors to consider when selecting an axle for a custom-built vehicle:

  1. Vehicle Type and Intended Use:
  2. Consider the type of vehicle you are building and its intended use. Factors such as vehicle weight, power output, terrain (on-road or off-road), towing capacity, and payload requirements will influence the axle selection. Off-road vehicles may require axles with higher strength and durability, while performance-oriented vehicles may benefit from axles that can handle increased power and torque.

  3. Axle Type:
  4. Choose the appropriate axle type based on your vehicle’s drivetrain configuration. Common axle types include solid axles (live axles) and independent axles. Solid axles are often used in heavy-duty applications and off-road vehicles due to their robustness and ability to handle high loads. Independent axles offer improved ride quality and handling characteristics but may have lower load-carrying capacities.

  5. Weight Capacity:
  6. Determine the required weight capacity of the axle based on the vehicle’s weight and intended payload. It’s crucial to select an axle that can handle the anticipated loads without exceeding its weight rating. Consider factors such as cargo, passengers, and accessories that may contribute to the overall weight.

  7. Axle Ratio:
  8. Choose an axle ratio that matches your vehicle’s powertrain and desired performance characteristics. The axle ratio affects the torque multiplication between the engine and wheels, influencing acceleration, towing capability, and fuel efficiency. Higher axle ratios provide more torque multiplication for improved low-end power but may sacrifice top-end speed.

  9. Braking System Compatibility:
  10. Ensure that the chosen axle is compatible with your vehicle’s braking system. Consider factors such as the axle’s mounting provisions for brake calipers, rotor size compatibility, and the need for an anti-lock braking system (ABS) if required.

  11. Suspension Compatibility:
  12. Consider the compatibility of the chosen axle with your vehicle’s suspension system. Factors such as axle mounting points, suspension geometry, and overall ride height should be taken into account. Ensure that the axle can be properly integrated with your chosen suspension components and that it provides sufficient ground clearance for your specific application.

  13. Aftermarket Support:
  14. Consider the availability of aftermarket support for the chosen axle. This includes access to replacement parts, upgrade options, and technical expertise. A robust aftermarket support network can be beneficial for future maintenance, repairs, and customization needs.

  15. Budget:
  16. Set a realistic budget for the axle selection, keeping in mind that high-performance or specialized axles may come at a higher cost. Balance your requirements with your budget to find the best axle option that meets your needs without exceeding your financial limitations.

When choosing an axle for a custom-built vehicle, it’s recommended to consult with knowledgeable professionals, experienced builders, or reputable axle manufacturers. They can provide valuable guidance, assist in understanding technical specifications, and help you select the most suitable axle for your specific custom vehicle project.

China wholesaler 1 Available CZPT in Bulk Track 1850mm or Optional Part Trailer Axle   axle shaftChina wholesaler 1 Available CZPT in Bulk Track 1850mm or Optional Part Trailer Axle   axle shaft
editor by CX 2024-05-09

China OEM Gjf Brand Axle Drive Shaft Left Drive Shaft for Chevrolet Cruze at 2012-2015 C-GM071-8h boat trailer axle

Product Description

 

Product Description

1.We are manufacturer of cv drive shaft,cv  axle, cv joint and cv boot, we have more than 20-years experience in producing and selling auto parts.
2.We have strict quality control, the quality of our products is very good.
3.We are professional in different market around the world.
4.The reviews our customers given us are very positive, we have confidence in our products.
5.OEM/ODM is available, meet your requirements well.
6.Large warehouse, huge stocks!!! friendly for those customers who want some quantity.
7.Ship products out very fastly, we have stock.

Product Name  Drive shaft Material  42CrMo alloy steel
Car fitment 

 Chevrolet 

Warranty  12 months 
Model  Ranger 3.0 TDI/MAZDA Fighter AT/MT Place of origin  ZHangZhoug, China
year  2007-2011 MOQ 4 PCS
OE number C-GM071-8H Delivery time  1-7 days 
OEM/ODM Yes Brand  GJF
Packing size  72*23.5*23.5 Payment  L/C,T/T,western Union,Cash,PayPal 
Sample service  Depends on the situation of stock  Weight  8.2088KG

Detailed Photos

 

Customer Review

 

Packaging & Shipping

 

 

FAQ

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 12 Months
Condition: New
Axle Number: 1
Application: Car
Certification: ASTM, CE, DIN, ISO
Material: Alloy
Samples:
US$ 32/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

cv axle

Where can I find reputable sources for troubleshooting CV axle noises or vibrations?

When experiencing CV axle noises or vibrations, it’s important to consult reputable sources for accurate troubleshooting guidance. Here are some places where you can find reliable information to help troubleshoot CV axle issues:

1. Vehicle Manufacturer’s Official Website:

Start by visiting the official website of your vehicle’s manufacturer. They often provide comprehensive resources, including troubleshooting guides, technical articles, and maintenance manuals. Look for the section specific to your vehicle model and search for information related to CV axle noises or vibrations. The manufacturer’s website is a reliable source of information as it offers insights directly from the vehicle’s designers and engineers.

2. Online Forums and Communities:

Online automotive forums and communities can be valuable sources of information for troubleshooting CV axle issues. Websites such as Reddit, CarTalk, and various enthusiast forums dedicated to your specific vehicle make or model can provide insights from experienced car owners, mechanics, and enthusiasts who have encountered similar problems. Search for threads or posts related to CV axle noises or vibrations and read through discussions to gain valuable troubleshooting tips and solutions.

3. Repair Manuals or Service Guides:

Repair manuals or service guides specific to your vehicle can offer detailed information on troubleshooting and diagnosing CV axle issues. These manuals provide step-by-step instructions, diagrams, and specifications that can help you identify the root cause of the problem. You can find these manuals in printed form from automotive bookstores or online platforms that offer digital versions. Popular sources include Haynes Manuals, Chilton Manuals, and vehicle manufacturer’s official service manuals.

4. Automotive Websites and Blogs:

There are numerous reputable automotive websites and blogs that publish articles and guides on troubleshooting various car-related issues, including CV axle problems. Websites like AutoZone, RepairPal, and YourMechanic often provide detailed explanations, diagnostic procedures, and possible solutions for common CV axle noises or vibrations. These sources typically have a team of automotive experts or professional mechanics who contribute to their content, ensuring reliable information.

5. Professional Mechanics and Repair Shops:

If you are unable to diagnose or resolve the CV axle issues on your own, it’s best to consult with a professional mechanic or take your vehicle to a reputable repair shop. Mechanics have the expertise, experience, and specialized tools to accurately diagnose and troubleshoot CV axle problems. They can provide professional guidance and perform necessary repairs or replacements to resolve the issue effectively.

Remember to cross-reference information from multiple sources to ensure accuracy and reliability. Troubleshooting CV axle noises or vibrations can vary depending on the specific symptoms and vehicle make or model, so it’s important to consider various perspectives and expert opinions to make an informed diagnosis.

In summary, reputable sources for troubleshooting CV axle noises or vibrations include the vehicle manufacturer’s official website, online forums and communities, repair manuals or service guides, automotive websites and blogs, as well as professional mechanics and repair shops. Utilize these sources to gather reliable information and guidance for troubleshooting and resolving CV axle issues in your vehicle.

cv axle

What is the impact of lifted or lowered suspension on CV axle angles and longevity?

Lifting or lowering a vehicle’s suspension can have a significant impact on the angles and longevity of CV axles. Here’s an explanation of how lifted or lowered suspension affects CV axle angles and longevity:

1. Lifted Suspension:

When a vehicle’s suspension is lifted, either through the use of taller springs, spacers, or suspension modifications, it can result in increased CV axle angles. The higher ride height alters the geometry of the suspension system, causing the CV axles to operate at more severe angles. This increased angle can lead to several effects:

a. Increased Wear and Stress: The higher CV axle angles in a lifted suspension setup can increase wear and stress on the CV joints and boots. The joints are forced to operate at more extreme angles, which can accelerate wear and potentially lead to premature failure. The constant articulation and operating angles can cause the CV boots to wear out faster, increasing the risk of contamination and damage to the CV joints.

b. Binding and Limited Articulation: In extreme cases, excessive lift can cause the CV axles to bind or reach their maximum operating angles, limiting the suspension’s articulation. This can result in reduced wheel travel, compromised off-road performance, and potential damage to the CV axles if the binding is severe.

c. Axle Shaft Length: In some lifted suspension setups, longer axle shafts may be required to accommodate the increased ride height. Longer axle shafts can help maintain proper CV axle angles and prevent excessive stress on the joints. It’s important to ensure that the correct length axle shafts are installed to maintain optimal CV axle operation.

2. Lowered Suspension:

Lowering a vehicle’s suspension, typically achieved through shorter springs, modified suspension components, or aftermarket kits, also affects CV axle angles and longevity. Here are some considerations:

a. Decreased CV Axle Angles: Lowering the suspension reduces the ride height of the vehicle, which can result in decreased CV axle angles. The reduced angles may alleviate some stress on the CV joints and boots, potentially leading to improved longevity.

b. Ground Clearance Concerns: Lowering a vehicle’s suspension may decrease ground clearance, making the CV axles more susceptible to potential impacts from road debris, speed bumps, or uneven surfaces. It’s important to consider the potential risks of reduced ground clearance and take appropriate measures to protect the CV axles, such as installing skid plates or ensuring proper alignment.

c. Suspension Geometry Adjustments: Lowering the suspension often requires adjustments to suspension geometry to maintain proper alignment. Incorrect suspension geometry can lead to increased CV axle angles, premature wear, and potential damage. It’s crucial to consult with a professional mechanic or suspension specialist to ensure proper suspension geometry adjustments are made when lowering the vehicle.

Regular Maintenance and Inspection:

Regardless of whether the suspension is lifted or lowered, it’s essential to regularly inspect and maintain the CV axles. This includes checking the CV boots for tears or damage, ensuring proper lubrication, and monitoring for any abnormal noises or vibrations during operation. Regular maintenance can help identify potential issues early and prevent further damage to the CV axles.

In summary, lifting or lowering a vehicle’s suspension can affect the angles and longevity of CV axles. Lifted suspensions can increase CV axle angles, leading to increased wear and stress, while lowered suspensions can potentially decrease angles but may present ground clearance concerns. Proper installation, alignment, and regular maintenance are crucial to mitigate the impact of suspension modifications on CV axle angles and longevity.

cv axle

What are the common causes of CV axle failure, and how can I prevent them?

CV axle failure can occur due to various factors, and understanding the common causes can help in preventing premature failures. Here’s an explanation of the common causes of CV axle failure and how you can prevent them:

1. Lack of lubrication:

Insufficient or contaminated lubrication is a common cause of CV axle failure. The CV joints and bearings require proper lubrication to reduce friction and prevent excessive wear. Regular maintenance, such as checking and replacing the CV axle grease as recommended by the vehicle manufacturer, can help prevent this issue. It’s important to use the correct type and amount of grease specified for your vehicle.

2. Torn or damaged CV boots:

The CV boots protect the CV joints from dirt, debris, and moisture, which can cause premature wear and damage. Torn or damaged CV boots expose the CV joints to these harmful elements, leading to accelerated wear and eventual failure. Regular inspection of the CV boots and prompt replacement if any damage is noticed can prevent this issue. Additionally, avoiding driving over rough terrain or obstacles that can damage the boots can help extend the lifespan of the CV axles.

3. Excessive torque or load:

Subjecting the CV axles to excessive torque or load can lead to premature failure. This can occur due to aggressive driving, sudden acceleration, or heavy towing loads. It’s important to operate the vehicle within its recommended limits and avoid putting excessive stress on the drivetrain components. Being mindful of your driving habits and avoiding abrupt maneuvers can help prevent CV axle failure caused by excessive torque or load.

4. Impact damage:

CV axles are susceptible to impact damage, especially when driving over potholes, speed bumps, or hitting curbs. Such impacts can cause fractures, bends, or misalignments in the CV axles, leading to failure over time. To prevent impact damage, it’s essential to drive cautiously and avoid rough road conditions whenever possible. Maintaining proper tire pressure and ensuring that the suspension components are in good condition can also help minimize the risk of impact damage.

5. Lack of maintenance:

Neglecting regular maintenance can contribute to CV axle failure. Routine inspections, including checking for signs of damage, leaks, or excessive wear, can help detect early warning signs of CV axle problems. Timely replacement of worn-out or damaged CV axles and addressing any issues promptly can prevent further damage to the drivetrain. Following the recommended maintenance schedule provided by the vehicle manufacturer is crucial for preventing CV axle failure due to neglect.

6. Environmental factors:

Environmental factors such as extreme temperatures, road salt, and corrosive substances can also contribute to CV axle failure. Exposure to harsh environments can accelerate the deterioration of CV axle components. Regular cleaning and inspection of the CV axles to remove any corrosive substances and protecting them with appropriate coatings or sealants can help mitigate the effects of environmental factors.

By understanding and addressing these common causes, you can take proactive measures to prevent CV axle failure. Regular maintenance, cautious driving, and prompt repairs are key to ensuring the longevity and reliability of the CV axles in your vehicle.

China OEM Gjf Brand Axle Drive Shaft Left Drive Shaft for Chevrolet Cruze at 2012-2015 C-GM071-8h   boat trailer axleChina OEM Gjf Brand Axle Drive Shaft Left Drive Shaft for Chevrolet Cruze at 2012-2015 C-GM071-8h   boat trailer axle
editor by CX 2024-04-16

China high quality 6000 Lbs Round CZPT Utility Trailer Axle Assembly with 12 Inch Hub Drum Electric Brake axle shaft

Product Description

Product Description

 

Part NO. Capacity Axle Size Bolt Pattern Overall Length Drum Dia
BZ-6K 6000lbs 45mm Round 6-139.7 Customized 9 inch

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: One Year
Condition: New
Axle Number: 2
Application: Trailer
Certification: ISO
Material: Steel
Samples:
US$ 170/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle

What are the safety considerations when working with axles, especially during repairs?

Working with axles, especially during repairs, requires careful attention to safety to prevent accidents and injuries. Here are some important safety considerations to keep in mind when working with axles:

1. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed boots. PPE helps protect against potential hazards such as flying debris, sharp edges, and accidental contact with heavy components.

2. Vehicle Stability:

Ensure that the vehicle is on a stable and level surface before working on the axles. Engage the parking brake and use wheel chocks to prevent unintended vehicle movement. The stability of the vehicle is crucial to maintain a safe working environment.

3. Lifting and Support:

Use proper lifting equipment, such as hydraulic jacks or vehicle lifts, to raise the vehicle safely. Follow the manufacturer’s guidelines for lifting points and weight capacities. Once the vehicle is lifted, support it securely with jack stands or other appropriate supports to prevent it from falling or shifting during repairs.

4. Lockout/Tagout:

If the repair work involves disconnecting or removing any electrical or mechanical components that could cause the axle or wheels to move, follow lockout/tagout procedures. This involves locking and tagging out the power source, so it cannot be accidentally energized while work is being performed.

5. Proper Tools and Equipment:

Use the correct tools and equipment for the job. Using improper tools or makeshift methods can lead to accidents and damage to the axle or surrounding components. Follow the manufacturer’s instructions and recommended procedures for disassembling, repairing, and reassembling the axle.

6. Proper Torque and Tightening:

When reassembling the axle components, use a torque wrench to ensure that fasteners are tightened to the manufacturer’s specifications. Over-tightening or under-tightening can lead to component failure or damage. Follow the recommended torque values provided by the vehicle manufacturer.

7. Safe Handling of Heavy Components:

Axle components can be heavy and cumbersome. Use appropriate lifting techniques and equipment, such as hoists or lifting straps, to safely handle heavy axle parts. Avoid lifting heavy components alone whenever possible and ask for assistance when needed.

8. Proper Disposal of Fluids and Waste:

If the repair involves draining fluids from the axle, such as differential oil, ensure proper disposal according to local regulations. Use appropriate containers to collect and store fluids and dispose of them at authorized collection points.

9. Training and Experience:

Working with axles requires knowledge and experience. If you are unfamiliar with axle repairs, consider seeking assistance from a qualified mechanic or technician who has the necessary training and expertise. If you decide to perform the repairs yourself, ensure that you have the appropriate knowledge and skills to carry out the task safely.

By following these safety considerations, you can help minimize the risk of accidents, injuries, and damage when working with axles, ensuring a safe working environment for yourself and others involved in the repair process.

axle

What is the difference between front and rear axles in a typical vehicle?

In a typical vehicle, there are distinct differences between the front and rear axles due to their respective roles and functions. Here are the key differences:

  1. Position:
  2. The main difference between the front and rear axles is their position in the vehicle. The front axle is located in the front of the vehicle, while the rear axle is positioned at the rear. This positioning is determined by the vehicle’s drivetrain configuration.

  3. Steering:
  4. The front axle is responsible for steering the vehicle. It is connected to the steering system, allowing the driver to control the direction of the vehicle. The front axle typically includes components such as steering knuckles, tie rods, and steering linkages.

  5. Driving:
  6. The rear axle is primarily responsible for driving the vehicle’s wheels. It receives power from the engine through the transmission or differential and transfers that power to the rear wheels. The rear axle may include components such as axle shafts, differential gears, and wheel hubs.

  7. Suspension:
  8. Both the front and rear axles play a role in the vehicle’s suspension system, but their configurations and functions differ. The front axle typically incorporates suspension components such as control arms, struts, or independent suspension systems to provide better handling, stability, and ride comfort. The rear axle may have a solid axle setup or independent suspension depending on the vehicle’s design.

  9. Load Distribution:
  10. The load distribution on the front and rear axles varies. In a typical vehicle, the front axle carries the weight of the engine, transmission, and a portion of the vehicle’s weight due to the front-end weight bias. The rear axle bears the weight of the vehicle’s occupants, cargo, and a portion of the vehicle’s weight. This distribution helps maintain proper balance and stability during acceleration, braking, and cornering.

  11. Driving Characteristics:
  12. The differences between the front and rear axles can influence the vehicle’s driving characteristics. The front axle’s role in steering affects the vehicle’s maneuverability and responsiveness. The rear axle’s responsibility for driving the wheels affects traction, acceleration, and stability, particularly in rear-wheel drive or four-wheel drive vehicles.

It’s important to note that the specific configurations and characteristics of front and rear axles can vary depending on the vehicle’s make, model, and drivetrain system. Different types of vehicles, such as front-wheel drive, rear-wheel drive, or all-wheel drive, may have variations in axle design and functionality.

Understanding the differences between the front and rear axles is essential for proper maintenance, repairs, and modifications of the vehicle’s drivetrain and suspension systems. If you have specific questions about your vehicle’s axles, it’s recommended to consult your vehicle’s owner’s manual or seek advice from qualified mechanics or automotive professionals.

axle

What is the primary function of an axle in a vehicle or machinery?

An axle plays a vital role in both vehicles and machinery, providing essential functions for their operation. The primary function of an axle is to transmit rotational motion and torque from an engine or power source to the wheels or other rotating components. Here are the key functions of an axle:

  1. Power Transmission:
  2. An axle serves as a mechanical link between the engine or power source and the wheels or driven components. It transfers rotational motion and torque generated by the engine to the wheels, enabling the vehicle or machinery to move. As the engine rotates the axle, the rotational force is transmitted to the wheels, propelling the vehicle forward or driving the machinery’s various components.

  3. Support and Load Bearing:
  4. An axle provides structural support and load-bearing capability, especially in vehicles. It bears the weight of the vehicle or machinery and distributes it evenly across the wheels or supporting components. This load-bearing function ensures stability, balance, and proper weight distribution, contributing to safe and efficient operation.

  5. Wheel and Component Alignment:
  6. The axle helps maintain proper alignment of the wheels or rotating components. It ensures that the wheels are parallel to each other and perpendicular to the ground, promoting stability and optimal tire contact with the road surface. In machinery, the axle aligns and supports the rotating components, ensuring their correct positioning and enabling smooth and efficient operation.

  7. Suspension and Absorption of Shocks:
  8. In vehicles, particularly those with independent suspension systems, the axle plays a role in the suspension system’s operation. It may incorporate features such as differential gears, CV joints, or other mechanisms that allow the wheels to move independently while maintaining power transfer. The axle also contributes to absorbing shocks and vibrations caused by road irregularities, enhancing ride comfort and vehicle handling.

  9. Steering Control:
  10. In some vehicles, such as trucks or buses, the front axle also serves as a steering axle. It connects to the steering mechanism, allowing the driver to control the direction of the vehicle. By turning the axle, the driver can steer the wheels, enabling precise maneuverability and navigation.

  11. Braking:
  12. An axle often integrates braking components, such as brake discs, calipers, or drums. These braking mechanisms are actuated when the driver applies the brakes, creating friction against the rotating axle or wheels and causing deceleration or stopping of the vehicle. The axle’s design can affect braking performance, ensuring effective and reliable stopping power.

Overall, the primary function of an axle in both vehicles and machinery is to transmit rotational motion, torque, and power from the engine or power source to the wheels or rotating components. Additionally, it provides support, load-bearing capability, alignment, suspension, steering control, and braking functions, depending on the specific application and design requirements.

China high quality 6000 Lbs Round CZPT Utility Trailer Axle Assembly with 12 Inch Hub Drum Electric Brake   axle shaftChina high quality 6000 Lbs Round CZPT Utility Trailer Axle Assembly with 12 Inch Hub Drum Electric Brake   axle shaft
editor by CX 2024-01-15

China OEM 16t Heavy Duty Trailer Axle Germany Type Six Spoke for Truck Semi-Trailer axle shaft

Product Description

Product Description

 

Product Parameters

Axle Type

 

Max  

Capacity

(T)

L2

Track

(mm)

 Brake ( mm )

 

Bearing

Spring Seat

Installation

 

Axle

 

L4Centre Distanceof Brake Chamber

( mm)

 

LD12FA1347D

12

1840

φ420x 180

33118

33213

≥980

150

423

LD13FA1348D

13

1840

φ 420x 200

33118

33213

 

≥900

150

360

LD14FA1348D

14

1840

φ 420x 200

32219

33215

≥900

150

356

LD16FA1348D

16

1850

φ 420x 200

322222

32314

≥900

150

360

LD18FA1348D

18

1850

Φ420x 200

322222

32314

≥900

150

380

Wheel Fixing

 

Total Length ( mm )

 

Recommended

Wheel

 

Weigth(Kg)

 

Stud

 

PCD(mm)

H(mm)

10-M22x 1.5ISO

335

280.8

~ 2144

7.5v-20

360

10-M22x 1.5ISO

335

280.8

~ 2144

7.5v-20

382

10-M22x 1.5ISO

335

280.8

~ 2198

8.0v-20

406

10-M22x 1.5ISO

335

280.8

~ 2265

8.5v-20

440

10-M22x 1.5ISO

335

280.8

~ 2265

8.5v-20

443

Certifications

 

Company Profile

ZheJiang Lide Auto Technology Co., Ltd., founded in 1996, is a professional manufacturer of trailer axle assemblies and semi-trailer suspension systems in China. We are located in HangZhou, the famous scenic city. We are 1 of specialized enterprises in the scientific research, design, production and sale, with more than 600 skilled employees and professional designers for different areas. We adopt the domestic and international technical standards in production, accurately grasp the information of the market demand and make quick and optimal designs. In this way, our axle, suspension and other fittings have the world-class technical quality through reasonable and advanced manufacture technologies. Our advanced processing technology, first-class production line and precision CNC machining equipment from home and abroad ensure the good quality of our semi-trailer axle assemblies, suspension systems and other correlative fittings. At the same time, our annual capacity for the export of American and German semi-trailer axle assemblies has achieved 60, 000 pieces . We obtained the ISO9001: 2000 International Quality Management System Certification in 2003 and TS16949 Certification in 2007. “First-class product quality, the meticulous and thoughtful service, and CZPT cooperation” is the philosophy that we always cherish. We not only meet the domestic market demand, but also export our products to Southeast Asia, the Middle East, Latin America and other countries, enjoying a good reputation. We always regard quality as life, and client as God. We will create a brilliant tomorrow with your sincere cooperation and support.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 3 Year
Condition: New
Axle Number: 1
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

22.5inch disc brake axle for truck trailer

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

axle

What are the key differences between live axles and dead axles in vehicle design?

In vehicle design, live axles and dead axles are two different types of axle configurations with distinct characteristics and functions. Here’s a detailed explanation of the key differences between live axles and dead axles:

Live Axles:

A live axle, also known as a solid axle or beam axle, is a type of axle where the wheels on both ends of the axle are connected and rotate together as a single unit. Here are the key features and characteristics of live axles:

  1. Connected Wheel Movement: In a live axle configuration, the wheels on both ends of the axle are linked together, meaning that any movement or forces applied to one wheel will directly affect the other wheel. This connection provides equal power distribution and torque to both wheels, making it suitable for off-road and heavy-duty applications where maximum traction is required.
  2. Simple Design: Live axles have a relatively simple design, consisting of a solid beam that connects the wheels. This simplicity makes them durable and capable of withstanding heavy loads and rough terrains.
  3. Weight and Cost: Live axles tend to be heavier and bulkier compared to other axle configurations, which can impact the overall weight and fuel efficiency of the vehicle. Additionally, the manufacturing and maintenance costs of live axles can be lower due to their simpler design.
  4. Suspension: In most cases, live axles are used in conjunction with leaf spring or coil spring suspensions. The axle is typically mounted to the vehicle’s chassis using leaf springs or control arms, allowing the axle to move vertically to absorb bumps and provide a smoother ride.
  5. Off-road Capability: Live axles are commonly used in off-road vehicles, trucks, and heavy-duty applications due to their robustness, durability, and ability to deliver power to both wheels simultaneously, enhancing traction and off-road performance.

Dead Axles:

A dead axle, also known as a dummy axle or non-driven axle, is a type of axle that does not transmit power to the wheels. It is primarily used to provide support and stability to the vehicle. Here are the key features and characteristics of dead axles:

  1. Independent Wheel Movement: In a dead axle configuration, each wheel operates independently, meaning that the movement or forces applied to one wheel will not affect the other wheel. Each wheel is responsible for its own power delivery and traction.
  2. Weight Distribution: Dead axles are often used to distribute the weight of the vehicle more evenly, especially in cases where heavy loads need to be carried. By adding an extra axle without driving capability, the weight can be distributed over a larger area, reducing the load on other axles and improving stability.
  3. Steering: Dead axles are commonly used as front axles in vehicles with rear-wheel drive configurations. They provide support for the front wheels and allow for steering control. The steering is typically achieved through a separate mechanism, such as a steering linkage or a steering gear.
  4. Reduced Complexity: Dead axles are simpler in design compared to live axles since they do not have the additional components required for power transmission. This simplicity can lead to lower manufacturing and maintenance costs.
  5. Efficiency and Maneuverability: Dead axles are often used in vehicles where power delivery to all wheels is not necessary, such as trailers, certain types of buses, and some light-duty vehicles. By eliminating the power transmission components, these vehicles can achieve better fuel efficiency and improved maneuverability.

It’s important to note that the choice between live axles and dead axles depends on the specific application, vehicle type, and desired performance characteristics. Vehicle manufacturers consider factors such as load capacity, traction requirements, off-road capability, cost, and fuel efficiency when determining the appropriate axle configuration for a particular vehicle model.

axle

Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?

Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:

  1. Regular Inspection:
  2. Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.

  3. Lubrication:
  4. Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.

  5. Seal Inspection and Replacement:
  6. Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.

  7. Proper Loading and Towing:
  8. Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.

  9. Driving Techniques:
  10. Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.

  11. Regular Wheel Alignment:
  12. Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.

  13. Proper Tire Inflation:
  14. Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.

  15. Service Intervals:
  16. Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.

It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.

axle

What is the primary function of an axle in a vehicle or machinery?

An axle plays a vital role in both vehicles and machinery, providing essential functions for their operation. The primary function of an axle is to transmit rotational motion and torque from an engine or power source to the wheels or other rotating components. Here are the key functions of an axle:

  1. Power Transmission:
  2. An axle serves as a mechanical link between the engine or power source and the wheels or driven components. It transfers rotational motion and torque generated by the engine to the wheels, enabling the vehicle or machinery to move. As the engine rotates the axle, the rotational force is transmitted to the wheels, propelling the vehicle forward or driving the machinery’s various components.

  3. Support and Load Bearing:
  4. An axle provides structural support and load-bearing capability, especially in vehicles. It bears the weight of the vehicle or machinery and distributes it evenly across the wheels or supporting components. This load-bearing function ensures stability, balance, and proper weight distribution, contributing to safe and efficient operation.

  5. Wheel and Component Alignment:
  6. The axle helps maintain proper alignment of the wheels or rotating components. It ensures that the wheels are parallel to each other and perpendicular to the ground, promoting stability and optimal tire contact with the road surface. In machinery, the axle aligns and supports the rotating components, ensuring their correct positioning and enabling smooth and efficient operation.

  7. Suspension and Absorption of Shocks:
  8. In vehicles, particularly those with independent suspension systems, the axle plays a role in the suspension system’s operation. It may incorporate features such as differential gears, CV joints, or other mechanisms that allow the wheels to move independently while maintaining power transfer. The axle also contributes to absorbing shocks and vibrations caused by road irregularities, enhancing ride comfort and vehicle handling.

  9. Steering Control:
  10. In some vehicles, such as trucks or buses, the front axle also serves as a steering axle. It connects to the steering mechanism, allowing the driver to control the direction of the vehicle. By turning the axle, the driver can steer the wheels, enabling precise maneuverability and navigation.

  11. Braking:
  12. An axle often integrates braking components, such as brake discs, calipers, or drums. These braking mechanisms are actuated when the driver applies the brakes, creating friction against the rotating axle or wheels and causing deceleration or stopping of the vehicle. The axle’s design can affect braking performance, ensuring effective and reliable stopping power.

Overall, the primary function of an axle in both vehicles and machinery is to transmit rotational motion, torque, and power from the engine or power source to the wheels or rotating components. Additionally, it provides support, load-bearing capability, alignment, suspension, steering control, and braking functions, depending on the specific application and design requirements.

China OEM 16t Heavy Duty Trailer Axle Germany Type Six Spoke for Truck Semi-Trailer   axle shaftChina OEM 16t Heavy Duty Trailer Axle Germany Type Six Spoke for Truck Semi-Trailer   axle shaft
editor by CX 2023-12-25

China OEM 13t 16t 18t 20t Semi Trailer Parts Beam Square Spoke Axle (07) axle shaft

Product Description

 

Company Profile

 

HangZhou Hilite Auto Parts Co., Ltd., Established In 2012, Professional Chinese Supplier Of Trailer Parts, Truck Parts And Agricultural Vehicle Parts. We Are a Professional & Modern Company Who Specializes In R&D, Production And Sales Of Leaf Spring ,Axles, Suspension,Brake System(Relay Valve,Abs…),Tank Trailer Accessories,Etc.

Our Advantages

 

Our Products Are Mainly Sold To Southeast Asia, Europe, Central And South America, The Middle East And Africa. Our Value Is To Gain More Market Share By Profit&Value Delivery Our Customers And Partners. CZPT Parts is Compatible with BP / Fw Accessories, Can Be Couple with SINOTRUCK/BENZ/FAW/XIHU (WEST LAKE) DIS.FENG… Trucks & Trailers. CZPT Is Committed To Providing Customer With Professional And Precise Services, High-Quality Products with Sufficient Experiecne. 

OEM & Packing

 

Product Description

Axle Type Max Capacity(t) Track(mm) Brake
(mm)
Spring Seat Installation Axle Beam
(mm)
Centre Distance Of Brake Chamber(mm) Wheel Fixing Total Length
(mm)
Recommend Wheel Axle Wright
(kg)
Stud (ISO) P.C.D(mm) H(mm)
HLT-3AC5-8 8 1850 420*150 ≥1080 127 428 10*M22*1.5 335 280.8 ~2145 7.5V-20 323
HLT-3AC5-10 13 1840 420*180 ≥970 127 380 10*M22*1.5  335 280.8 ~2180 7.5V-20 342
HLT-3AC5-10 13 1840 420*180 ≥930 150 380 10*M22*1.5  335 280.8 ~2180 7.5V-20 340
HLT-3AC5-11 14 1840 420*220 ≥930 150 340 10*M22*1.5  335 280.8 ~2180 7.5V-20 358
HLT-3AC5-11 15 1850 420*180 ≥940 150 390 10*M22*1.5  335 280.8 ~2200 8.0V-20 370
HLT-3AC5-11 16 1850 420*220 ≥940 150 350 10*M22*1.5  335 280.8 ~2200 8.0V-20 388
HLT-3AC5-12 20 1850 420*220 ≥940 150 345 10*M24*1.5  335 280.8 ~2247 8.0V-20 430
HLT-3AC5-12 25 1850 420*220 ≥940 150 340 10*M24*1.5  335 280.8 ~2215 8.0V-20 474

Hlt Specializes In R&D, Production And Sales Of Auto Leaf Springs, American &German Axles, Leaf Spring Suspensions, Air Suspensions, Hydraulic Suspensions, Rigid Suspensions And Other Types Of Suspensions, Single/Double Landing Gear, Electric Landing Gear, Hydraulic Landing Gear And Various Types Of Landing Gear , As Well As Tank Trailer Accessories Such As Manhole Covers, Discharge Valves, Subsea Valves, Etc. 500,000+ Types, One Stop Shopping For All.

Quality Comparasion

Superior One-Piece Low-Alloy Axle Tube, Strong Carrying Capacity & High Bending Strength. 
Hardening And Tempering As a Whole, Cnc Machining.
Brake Linings, Environment-Friendly Andnon-Asbestos, Wear Life Increased 25%.
Xhp Mobil Grease To Lengthenmaintenance-Free Time.
Bearing Is Designed For Heavy-Dutyvehicles, Famous Domestic Brand.
. Interchangeable Brake Components Ands-Camshaft Make Brake Action More Flexible.

Certifications

 

HLT Provide Guaranteed Services For All Products, Respect And Pay Attention To The Opinions Of Customers And Partners, Including Customizing And Developing New Products According To Customers’ Requirements, Believing Customer Satisfaction Is Our CZPT Pursuit. More Than 76% Of The Customers Who Have Used Hilite Products Have Become Our Loyal Customers, Who Have Established An Incredible Brand Effect For Us In The Local Area.

Factory View

 

We Would Like To Cooperate With You To Create More New Bonds In The Future.

FAQ

1Q: CAN YOU DESIGN AND PRODUCE THE PRODUCTS WE WANT?

A:We Have Rich Experience And Strong Technical Support To Design And Produce By Your Samples Or Drawings.Warmly Welcomed For Your Samples Or Drawing.

2Q:WHAT’S THE PROCESS OF PURCHASING ORDERS FROM YOU? 
A:1.Send Us Your Specific Demand,Such As Oem Numbers, Photos, Trailer Models,Ect. 
2.Confirm Our Quotation With Photos And Other Detials.
3.Negotiate About All Details You Need: Packing, Delivery Terms,Warranty, Ect. 
4.Sign The Contract For The Payment,We Will Make The Production On Time.

3Q.WHAT IS YOUR TERMS OF PAYMENT?
A: T/T 30% As Deposit, And 70% Before Delivery. 
L/C,T/T,D/P, Western Union,Paypal,Money Gram, Others
Photos And Videos Of The Products Will Be Provided Before Your Balance Payment.

4Q :WE WANT TO TRY IN A SMALL QUANTITY AS TRIAL ORDER,BUT LESS THAN YOUR MOQ. WHAT IS YOUR POLICY?
Sample Test And Sample Orders Could Be Accepted If We Have Ready Parts In Stock.

After-sales Service: 12 Months
Condition: New
Axle Number: 1
Application: Trailer
Certification: ISO, CCC BV SGS TUV
Material: Steel
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle

What are the safety considerations when working with axles, especially during repairs?

Working with axles, especially during repairs, requires careful attention to safety to prevent accidents and injuries. Here are some important safety considerations to keep in mind when working with axles:

1. Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed boots. PPE helps protect against potential hazards such as flying debris, sharp edges, and accidental contact with heavy components.

2. Vehicle Stability:

Ensure that the vehicle is on a stable and level surface before working on the axles. Engage the parking brake and use wheel chocks to prevent unintended vehicle movement. The stability of the vehicle is crucial to maintain a safe working environment.

3. Lifting and Support:

Use proper lifting equipment, such as hydraulic jacks or vehicle lifts, to raise the vehicle safely. Follow the manufacturer’s guidelines for lifting points and weight capacities. Once the vehicle is lifted, support it securely with jack stands or other appropriate supports to prevent it from falling or shifting during repairs.

4. Lockout/Tagout:

If the repair work involves disconnecting or removing any electrical or mechanical components that could cause the axle or wheels to move, follow lockout/tagout procedures. This involves locking and tagging out the power source, so it cannot be accidentally energized while work is being performed.

5. Proper Tools and Equipment:

Use the correct tools and equipment for the job. Using improper tools or makeshift methods can lead to accidents and damage to the axle or surrounding components. Follow the manufacturer’s instructions and recommended procedures for disassembling, repairing, and reassembling the axle.

6. Proper Torque and Tightening:

When reassembling the axle components, use a torque wrench to ensure that fasteners are tightened to the manufacturer’s specifications. Over-tightening or under-tightening can lead to component failure or damage. Follow the recommended torque values provided by the vehicle manufacturer.

7. Safe Handling of Heavy Components:

Axle components can be heavy and cumbersome. Use appropriate lifting techniques and equipment, such as hoists or lifting straps, to safely handle heavy axle parts. Avoid lifting heavy components alone whenever possible and ask for assistance when needed.

8. Proper Disposal of Fluids and Waste:

If the repair involves draining fluids from the axle, such as differential oil, ensure proper disposal according to local regulations. Use appropriate containers to collect and store fluids and dispose of them at authorized collection points.

9. Training and Experience:

Working with axles requires knowledge and experience. If you are unfamiliar with axle repairs, consider seeking assistance from a qualified mechanic or technician who has the necessary training and expertise. If you decide to perform the repairs yourself, ensure that you have the appropriate knowledge and skills to carry out the task safely.

By following these safety considerations, you can help minimize the risk of accidents, injuries, and damage when working with axles, ensuring a safe working environment for yourself and others involved in the repair process.

axle

Can you recommend axle manufacturers known for durability and reliability?

When it comes to choosing axle manufacturers known for durability and reliability, there are several reputable companies in the automotive industry. While individual experiences and preferences may vary, the following axle manufacturers have a track record of producing high-quality products:

1. Dana Holding Corporation: Dana is a well-known manufacturer of axles, drivetrain components, and sealing solutions. They supply axles to various automotive manufacturers and have a reputation for producing durable and reliable products. Dana axles are commonly found in trucks, SUVs, and off-road vehicles.

2. AAM (American Axle & Manufacturing): AAM is a leading manufacturer of driveline and drivetrain components, including axles. They supply axles to both OEMs (Original Equipment Manufacturers) and the aftermarket. AAM axles are known for their durability and are often found in trucks, SUVs, and performance vehicles.

3. GKN Automotive: GKN Automotive is a global supplier of driveline systems, including axles. They have a strong reputation for producing high-quality and reliable axles for a wide range of vehicles. GKN Automotive supplies axles to various automakers and is recognized for their technological advancements in the field.

4. Meritor: Meritor is a manufacturer of axles, brakes, and other drivetrain components for commercial vehicles. They are known for their robust and reliable axle products that cater to heavy-duty applications in the commercial trucking industry.

5. Spicer (Dana Spicer): Spicer, a division of Dana Holding Corporation, specializes in manufacturing drivetrain components, including axles. Spicer axles are widely used in off-road vehicles, trucks, and SUVs. They are known for their durability and ability to withstand demanding off-road conditions.

6. Timken: Timken is a trusted manufacturer of bearings, seals, and other mechanical power transmission products. While they are primarily known for their bearings, they also produce high-quality axle components used in various applications, including automotive axles.

It’s important to note that the availability of specific axle manufacturers may vary depending on the region and the specific vehicle make and model. Additionally, different vehicles may come equipped with axles from different manufacturers as per the OEM’s selection and sourcing decisions.

When considering axle replacements or upgrades, it is advisable to consult with automotive experts, including mechanics or dealerships familiar with your vehicle, to ensure compatibility and make informed decisions based on your specific needs and requirements.

axle

How do solid axles differ from independent axles in terms of performance?

When comparing solid axles and independent axles in terms of performance, there are several key differences to consider. Both types of axles have their advantages and disadvantages, and their suitability depends on the specific application and desired performance characteristics. Here’s a comparison of solid axles and independent axles:

Aspect Solid Axles Independent Axles
Load-Bearing Capability Solid axles have high load-bearing capability due to their robust and sturdy construction. They can handle heavy loads and provide excellent stability, making them suitable for off-road vehicles, heavy-duty trucks, and towing applications. Independent axles typically have lower load-bearing capability compared to solid axles. They are designed for lighter loads and offer improved ride comfort and handling characteristics. They are commonly used in passenger cars, sports cars, and vehicles with a focus on maneuverability and road performance.
Wheel Articulation Solid axles have limited wheel articulation due to their connected and rigid design. This can result in reduced traction and compromised wheel contact with the ground on uneven terrain. However, solid axles provide excellent traction in situations where the weight distribution on all wheels needs to be maintained, such as in off-road or rock-crawling applications. Independent axles offer greater wheel articulation as each wheel can move independently of the others. This allows the wheels to better conform to uneven terrain, maximizing traction and maintaining contact with the ground. Independent axles provide improved off-road capability, enhanced handling, and better ride comfort.
Ride Comfort Due to their rigid design, solid axles generally provide a stiffer and less compliant ride compared to independent axles. They transmit more road shocks and vibrations to the vehicle’s occupants, resulting in a rougher ride quality. Independent axles are known for providing better ride comfort. Each wheel can react independently to road imperfections, absorbing shocks and vibrations more effectively. This leads to a smoother and more comfortable ride, particularly on paved roads and surfaces with minor irregularities.
Handling and Stability Solid axles offer excellent stability due to their connected nature. They provide better resistance to lateral forces, making them suitable for high-speed stability and towing applications. However, the rigid axle design can limit overall handling and maneuverability, particularly in tight corners or during quick direction changes. Independent axles generally offer improved handling and maneuverability. Each wheel can react independently to steering inputs, allowing for better cornering performance and agility. Independent axles are commonly found in vehicles where precise handling and responsive steering are desired, such as sports cars and performance-oriented vehicles.
Maintenance and Repair Solid axles are relatively simpler in design and have fewer moving parts, making them easier to maintain and repair. They are often more resistant to damage and require less frequent servicing. However, if a component within the axle assembly fails, the entire axle may need to be replaced. Independent axles are typically more complex in design and have multiple moving parts, such as control arms, CV joints, or bearings. This complexity can result in higher maintenance and repair costs. However, if a failure occurs, only the affected component needs to be replaced, reducing repair expenses compared to replacing the entire axle.

It’s important to note that advancements in suspension and axle technologies have resulted in various hybrid systems that combine features of solid and independent axles. These systems aim to provide a balance between load-bearing capability, wheel articulation, ride comfort, and handling performance based on specific application requirements.

In summary, solid axles excel in load-bearing capability, stability, and durability, making them suitable for heavy-duty applications and off-road conditions. Independent axles offer improved ride comfort, better wheel articulation, enhanced handling, and maneuverability, making them suitable for passenger cars and vehicles focused on road performance. The choice between solid axles and independent axles depends on the specific needs and priorities of the vehicle or machinery.

China OEM 13t 16t 18t 20t Semi Trailer Parts Beam Square Spoke Axle (07)   axle shaftChina OEM 13t 16t 18t 20t Semi Trailer Parts Beam Square Spoke Axle (07)   axle shaft
editor by CX 2023-11-13

China wholesaler Low Price Trailer Steel CZPT Grease Equalizer Shaft with Self-Locking Nut wholesaler

Product Description

  We are a expert company engaged in the manufacture and sale of Trailer suspensions, Trailer axles, Trailer landing gears, Semi-trailers and trailers. We can supply a extensive assortment of items to meet up with the ever-changing marketplace demands. Tailored orders are welcomed. 
  Our once-a-year turnover is USD10 million. Our primary marketplaces incorporate Japan, Europe, Southeast Asia, the Center East and mainland China.
  Our company insists on our business spirit of “Clients As Gods, Top quality As Top”. We are more and more growing our international industry share dependent on top quality items, superb solutions, reasonable prices and well timed delivery. Remember to contact us at any time for a lot more details.
  We will treasure each and every opportunity to cooperate with you. We will use our Sincerity and Very good High quality to acquire your believe in!

Q1. What is your terms of packing?
A: Typically, we pack our goods in neutral white containers and brown cartons. If you have lawfully registered patent,
we can pack the products in your branded packing containers soon after acquiring your authorization letters.

Q2. What is your phrases of payment?
A: T/T 30% as deposit, and 70% ahead of delivery. We will present you the images of the merchandise and packages
before you spend the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

This fall. How about your supply time?
A: Normally, it will consider 5 to 10 times after obtaining your progress payment. The particular supply time relies upon
on the items and the amount of your buy.

Q5. Can you create in accordance to the samples?
A: Of course, we can create by your samples or technological drawings. We can develop the molds and fixtures.

Q6. What is your sample policy?
A: We can offer the sample if we have prepared components in inventory, but the clients have to pay out the sample expense and
the courier price.

Q7. Do you examination all your items ahead of shipping?
A: Of course, we have 100% take a look at ahead of shipping and delivery

Q8: How do you make our organization lengthy-time period and good partnership?
A:1. We preserve very good quality and competitive price tag to make certain our buyers benefit
two. We respect every single buyer as our good friend and we sincerely do business and make buddies with them,
no issue where they appear from.
 

What is a driveshaft and how a lot does it value to exchange 1?

Your car is made up of several moving areas. Being aware of each portion is critical since a broken driveshaft can critically damage other elements of the automobile. You could not know how crucial your driveshaft is, but it’s important to know if you want to fix your automobile. In this report, we will examine what a driveshaft is, what its signs and symptoms are, and how a lot it fees to replace a driveshaft.
air-compressor

Fix damaged driveshafts

A ruined driveshaft does not enable you to switch the wheels freely. It also exposes your vehicle to larger repair fees due to damaged driveshafts. If the push shaft breaks while the vehicle is in movement, it may possibly lead to a crash. Also, it can substantially affect the overall performance of the vehicle. If you will not correct the difficulty correct absent, you could chance far more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the generate shaft is guarded from dust, dampness, and dust. A correct driveshaft include will prevent grease from accumulating in the driveshaft, decreasing the opportunity of additional harm. The grease will also cushion the metal-to-steel get in touch with in the constant velocity joints. For case in point, hitting a gentle materials is much better than hitting a metallic wall. A broken prop shaft can not only trigger hard cornering, but it can also lead to the car to vibrate, which can even more damage the relaxation of the drivetrain.
If the driveshaft is damaged, you can pick to repair it your self or just take it to a mechanic. Normally, driveshaft repairs price about $200 to $300. Parts and labor might vary primarily based on your automobile sort and sort of repair. These areas can value up to $600. Even so, if you will not have a mechanical history, it truly is much better to depart it to a professional.
If you discover that a single of the two travel shafts is worn, it really is time to fix it. Worn bushings and bearings can cause the travel shaft to vibrate unnecessarily, triggering it to split and result in further damage. You can also verify the center bearing if there is any play in the bearing. If these signs and symptoms take place, it is very best to take your automobile to a mechanic as before long as possible.
air-compressor

Learn about U-joints

Even though most autos have at the very least a single variety of U-joint, there are other kinds available. CV joints (also known as scorching rod joints) are used in a range of programs. The slight axis is shorter than the key axis on which the U-joint is found. In each circumstances, the U-joints are lubricated at the manufacturing facility. Throughout servicing, the generate shaft slip joint should be lubricated.
There are two major designs of U-joints, including forged and push match. They are typically held in location by C-clamps. Some of these U-joints have knurls or grooves. When picking the correct fitting, be certain to evaluate the total fitting. To make positive you get the right measurement, you can use the size chart or check out the guide for your specific model.
In addition to lubrication, the problem of the U-joint should be checked regularly. Lubricate them routinely to stay away from premature failure. If you listen to a clicking audio when shifting gears, the u-joint area could be misaligned. In this scenario, the bearing may require to be serviced. If there is insufficient grease in the bearings, the universal joint might require to be replaced.
U-joint is an crucial element of the automobile transmission shaft. With no them, your car would have no wheeled suspension. With no them, your motor vehicle will have a rickety entrance stop and a wobbly rear end. Simply because automobiles are unable to drive on ultra-flat surfaces, they want adaptable driveshafts. The U-joint compensates for this by enabling it to go up and down with the suspension.
A proper inspection will determine if your u-joints are unfastened or worn. It ought to be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps ought to not move. Any indicators of roughness or dress in would indicate a want for a new UJ. Also, it is essential to notice that worn UJs are not able to be repaired.

Symptoms of Driveshaft Failure

1 of the most typical difficulties linked with a defective driveshaft is issues turning the wheels. This severely restrictions your total manage in excess of the automobile. Thankfully, there are many symptoms that could point out that your driveshaft is failing. You ought to get instant methods to figure out the result in of the dilemma. 1 of the most common triggers of driveshaft failure is a weak or faulty reverse gear. Other widespread leads to of driveshaft harm consist of driving way too difficult, acquiring trapped in reverse gear and differential lock.
An additional sign of a unsuccessful driveshaft is strange sounds even though driving. These noises are typically the end result of wear on the bushings and bearings that help the push shaft. They can also result in your automobile to screech or scratch when switching from generate to idle. Dependent on the velocity, the sound could be accompanied by vibration. When this transpires, it’s time to send your vehicle in for a driveshaft replacement.
One of the most frequent signs and symptoms of driveshaft failure is obvious jitter when accelerating. This could be a sign of a unfastened U-joint or worn centre bearing. You ought to thoroughly inspect your auto to establish the lead to of these seems and corresponding signs. A accredited mechanic can aid you decide the cause of the sounds. A broken propshaft can seriously limit the drivability of the vehicle.
Standard inspection of the drive shaft can avoid critical damage. Depending on the hurt, you can exchange the driveshaft for wherever from $500 to $1,000. Depending on the severity of the injury and the degree of restore, the value will rely on the number of parts that require to be replaced. Do not travel with a bad driveshaft as it can lead to a serious crash. There are numerous methods to steer clear of this difficulty completely.
The very first symptom to seem for is a worn U-joint. If the U-joint comes loose or moves too considerably when trying to flip the steering wheel, the driveshaft is faulty. If you see obvious rust on the bearing cap seals, you can just take your auto to a mechanic for a extensive inspection. A worn u-joint can also reveal a problem with the transmission.
air-compressor

The cost of replacing the travel shaft

Depending on your condition and support centre, a driveshaft restore can price as small as $three hundred or as high as $2,000, depending on the specifics of your car. Labor expenses are generally all around $70. Costs for the components by themselves assortment from $four hundred to $600. Labor charges also differ by design and motor vehicle make. In the end, the selection to restore or change the driveshaft will rely on regardless of whether you require a rapid automobile fix or a entire vehicle mend.
Some cars have two separate driveshafts. One particular goes to the front and the other goes to the back. If your automobile has four wheel push, you will have two. If you’re changing the axles of an all-wheel-generate auto, you will require a special element for each and every axle. Choosing the wrong one particular can result in more costly repairs. Before you begin searching, you must know exactly how much it will cost.
Dependent on the type of car you very own, a driveshaft substitute will value among PS250 and PS500. Luxurious autos can expense as significantly as PS400. Even so, for security and the overall functionality of the vehicle, changing the driveshaft might be a necessary fix. The price of changing a driveshaft depends on how extended your auto has been on the highway and how much use and tear it has experienced. There are some signs that show a defective push shaft and you should get immediate motion.
Repairs can be pricey, so it truly is best to employ the service of a mechanic with knowledge in the field. You’ll be shelling out hundreds of bucks a month, but you’ll have peace of head knowing the occupation will be carried out correct. Don’t forget that you could want to inquire a pal or family member to help you. Dependent on the make and model of your auto, replacing the driveshaft is a lot more expensive than replacing the elements and performing it yourself.
If you suspect that your drive shaft is ruined, be certain to resolve it as before long as possible. It is not recommended to travel a vehicle with irregular vibration and audio for a prolonged time. Fortunately, there are some fast methods to correct the dilemma and keep away from pricey repairs later on. If you have discovered the signs over, it truly is really worth obtaining the occupation completed. There are numerous indications that your driveshaft might want service, including absence of electricity or trouble relocating the motor vehicle.

China wholesaler Low Price Trailer Steel CZPT Grease Equalizer Shaft with Self-Locking Nut     wholesaler China wholesaler Low Price Trailer Steel CZPT Grease Equalizer Shaft with Self-Locking Nut     wholesaler

China best American Balance Arm Pin Equalizer Shaft Trailer German Suspension Hanger Pin with Hot selling

Merchandise Description

  We are a professional enterprise engaged in the manufacture and sale of Trailer suspensions, Trailer axles, Trailer landing gears, Semi-trailers and trailers. We can provide a broad assortment of goods to fulfill the at any time-modifying marketplace requires. Personalized orders are welcomed. 
  Our once-a-year turnover is USD10 million. Our primary marketplaces consist of Japan, Europe, Southeast Asia, the Middle East and mainland China.
  Our business insists on our business spirit of “Customers As Gods, Top quality As Leading”. We are ever more increasing our intercontinental marketplace share based mostly on good quality goods, superb companies, sensible rates and timely shipping. You should get in touch with us at any time for a lot more information.
  We will treasure every single opportunity to cooperate with you. We will use our Sincerity and Very good Quality to win your have confidence in!

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white packing containers and brown cartons. If you have lawfully registered patent,
we can pack the items in your branded packing containers right after receiving your authorization letters.

Q2. What is your terms of payment?
A: T/T thirty% as deposit, and 70% prior to supply. We are going to demonstrate you the images of the products and packages
prior to you pay the harmony.

Q3. What is your conditions of shipping?
A: EXW, FOB, CFR, CIF, DDU.

This fall. How about your shipping and delivery time?
A: Typically, it will get 5 to ten times soon after obtaining your progress payment. The particular shipping time is dependent
on the objects and the quantity of your get.

Q5. Can you make in accordance to the samples?
A: Yes, we can make by your samples or complex drawings. We can create the molds and fixtures.

Q6. What is your sample coverage?
A: We can offer the sample if we have all set parts in inventory, but the consumers have to pay out the sample value and
the courier price.

Q7. Do you check all your goods prior to shipping and delivery?
A: Yes, we have one hundred% check prior to shipping and delivery

Q8: How do you make our business lengthy-expression and great partnership?
A:1. We preserve good top quality and competitive price tag to ensure our consumers reward
two. We respect each and every buyer as our buddy and we sincerely do business and make close friends with them,
no make a difference where they appear from.
 

Manual to Generate Shafts and U-Joints

If you might be worried about the performance of your car’s driveshaft, you happen to be not alone. Several automobile owners are unaware of the warning symptoms of a failed driveshaft, but understanding what to appear for can aid you keep away from high priced repairs. Right here is a brief guidebook on travel shafts, U-joints and maintenance intervals. Listed under are essential factors to think about before replacing a car driveshaft.
air-compressor

Symptoms of Driveshaft Failure

Pinpointing a faulty driveshaft is simple if you’ve at any time read a odd sound from underneath your auto. These appears are induced by worn U-joints and bearings supporting the push shaft. When they fail, the drive shafts end rotating properly, creating a clanking or squeaking sound. When this occurs, you might hear noise from the aspect of the steering wheel or floor.
In addition to sound, a faulty driveshaft can lead to your auto to swerve in restricted corners. It can also guide to suspended bindings that limit overall control. Consequently, you should have these signs checked by a mechanic as before long as you observe them. If you recognize any of the signs and symptoms over, your following step should be to tow your motor vehicle to a mechanic. To steer clear of extra trouble, make sure you’ve taken safety measures by checking your car’s oil amount.
In addition to these signs and symptoms, you should also search for any noise from the drive shaft. The initial factor to search for is the squeak. This was caused by extreme hurt to the U-joint hooked up to the push shaft. In addition to sound, you must also seem for rust on the bearing cap seals. In excessive situations, your vehicle can even shudder when accelerating.
Vibration whilst driving can be an early warning indication of a driveshaft failure. Vibration can be owing to worn bushings, trapped sliding yokes, or even springs or bent yokes. Too much torque can be brought on by a worn center bearing or a broken U-joint. The vehicle may make strange noises in the chassis system.
If you discover these signs, it is time to take your car to a mechanic. You must check frequently, particularly large vehicles. If you are not confident what is actually leading to the sound, check out your car’s transmission, engine, and rear differential. If you suspect that a driveshaft demands to be changed, a licensed mechanic can substitute the driveshaft in your automobile.
air-compressor

Push shaft variety

Driveshafts are utilised in numerous different varieties of autos. These consist of four-wheel push, front-engine rear-wheel push, bikes and boats. Each kind of drive shaft has its personal goal. Under is an overview of the 3 most frequent kinds of push shafts:
The driveshaft is a round, elongated shaft that transmits torque from the motor to the wheels. Push shafts usually contain several joints to compensate for changes in size or angle. Some drive shafts also include connecting shafts and inner continuous velocity joints. Some also consist of torsional dampers, spline joints, and even prismatic joints. The most crucial point about the driveshaft is that it plays a important part in transmitting torque from the motor to the wheels.
The drive shaft demands to be each light-weight and sturdy to transfer torque. Even though steel is the most generally utilised content for automotive driveshafts, other components such as aluminum, composites, and carbon fiber are also commonly used. It all is dependent on the function and dimension of the car. Precision Manufacturing is a good resource for OEM products and OEM driveshafts. So when you are looking for a new driveshaft, keep these variables in thoughts when acquiring.
Cardan joints are an additional common generate shaft. A universal joint, also recognized as a U-joint, is a flexible coupling that makes it possible for a single shaft to travel the other at an angle. This variety of travel shaft permits electricity to be transmitted even though the angle of the other shaft is continually shifting. Even though a gimbal is a good selection, it truly is not a perfect resolution for all programs.
CZPT, Inc. has state-of-the-art machinery to services all varieties of generate shafts, from little cars to race autos. They serve a selection of requirements, like racing, market and agriculture. Whether you require a new travel shaft or a simple adjustment, the employees at CZPT can meet up with all your needs. You will be again on the road before long!

U-joint

If your auto yoke or u-joint demonstrates indications of dress in, it really is time to substitute them. The best way to exchange them is to adhere to the actions beneath. Use a massive flathead screwdriver to examination. If you really feel any movement, the U-joint is faulty. Also, examine the bearing caps for harm or rust. If you can not find the u-joint wrench, attempt checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or inadequately lubricated, it can quickly fail and trigger your vehicle to squeak while driving. One more indicator that a joint is about to fall short is a unexpected, too much whine. Verify your u-joints each yr or so to make sure they are in appropriate operating buy.
Whether or not your u-joint is sealed or lubricated will rely on the make and design of your car. When your car is off-road, you need to have to install lubricable U-joints for toughness and longevity. A new driveshaft or derailleur will cost much more than a U-joint. Also, if you never have a very good knowing of how to exchange them, you may require to do some transmission operate on your motor vehicle.
When changing the U-joint on the travel shaft, be sure to decide on an OEM replacement anytime feasible. Even though you can easily restore or change the original head, if the u-joint is not lubricated, you might require to replace it. A broken gimbal joint can lead to issues with your car’s transmission or other vital components. Changing your car’s U-joint early can make sure its lengthy-term overall performance.
An additional option is to use two CV joints on the drive shaft. Employing multiple CV joints on the drive shaft assists you in circumstances exactly where alignment is tough or working angles do not match. This variety of driveshaft joint is a lot more pricey and intricate than a U-joint. The disadvantages of employing numerous CV joints are added size, bodyweight, and decreased running angle. There are a lot of factors to use a U-joint on a push shaft.
air-compressor

routine maintenance interval

Examining U-joints and slip joints is a essential part of routine routine maintenance. Most vehicles are geared up with lube fittings on the driveshaft slip joint, which must be checked and lubricated at each and every oil adjust. CZPT professionals are well-versed in axles and can easily recognize a undesirable U-joint based on the audio of acceleration or shifting. If not repaired effectively, the push shaft can slide off, necessitating high-priced repairs.
Oil filters and oil alterations are other areas of a vehicle’s mechanical system. To prevent rust, the oil in these elements have to be changed. The same goes for transmission. Your vehicle’s driveshaft ought to be inspected at the very least each and every 60,000 miles. The vehicle’s transmission and clutch need to also be checked for put on. Other elements that should be checked incorporate PCV valves, oil traces and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is ideal to have it serviced by CZPT’s East Lexington professionals. These services need to be executed every single two to 4 many years or every single 24,000 miles. For greatest benefits, refer to the owner’s manual for suggested servicing intervals. CZPT experts are knowledgeable in axles and differentials. Regular maintenance of your drivetrain will keep it in good functioning get.

China best American Balance Arm Pin Equalizer Shaft Trailer German Suspension Hanger Pin     with Hot sellingChina best American Balance Arm Pin Equalizer Shaft Trailer German Suspension Hanger Pin     with Hot selling